AFMG Network Forum
AFMG Network Forum Index -> AFMG EASERA -> Measurement Automation
Post new topic  Reply to topic View previous topic :: View next topic 
Measurement Automation
PostPosted: Thu Nov 06, 2008 1:55 pm Reply with quote
hornloaded
Member
 
Joined: 28 Oct 2005
Posts: 5
Location: California




Coming home from my tenth arena in as many weeks, I was wondering if I could automate the Impulse gathering process (saving me miles of walking back and forth). Looking around in Easera, I see the automation tap has promises.
If I understand this correctly, I can set up either a Simple Series or a Polar Measurement. Designate the number of measurements, and set the pause time. One question I have is, what is the maximum pause time that can be set. I imagine I would need 30 - 60 seconds to move the mic around.
Am I correct in my understanding of this feature? And do I need to simply upgrade to the "PRO" version to access this tab?

Thanks for the help

Doug Dodge
Daktronics
View user's profile Send private message
PostPosted: Thu Nov 06, 2008 7:29 pm Reply with quote
Bruce
Member
 
Joined: 19 Apr 2005
Posts: 459
Location: Minneapolis, MN, USA




Hi Doug,

You would not believe how long if I told you! EASERA accepts a lot of seconds. 30-60 certainly, but if you needed 5 minutes, then enter 300 seconds.

You are correct that you can use the Simple Series for this. Polar is an add-on module that can be purchased for either EASERA or EASERA Pro.

_________________
Best Regards,
Bruce C. Olson
View user's profile Send private message Send e-mail Visit poster's website
PostPosted: Mon Nov 10, 2008 9:19 pm Reply with quote
hornloaded
Member
 
Joined: 28 Oct 2005
Posts: 5
Location: California




Thanks Bruce,
When I go to the button, I get the message "not authorized for this license". What do I need to upgrade to to get this feature.

Thanks again for the info.

Doug Dodge
Daktronics
View user's profile Send private message
PostPosted: Thu Nov 13, 2008 12:04 am Reply with quote
Bruce
Member
 
Joined: 19 Apr 2005
Posts: 459
Location: Minneapolis, MN, USA




Doug,

You need to purchase the Polar module. You'll then get a new licence that will enable the new capability in your current EASERA. Contact Carl or Jonas at Renkus-Heinz.

_________________
Best Regards,
Bruce C. Olson
View user's profile Send private message Send e-mail Visit poster's website
AFMG Network Forum Index -> AFMG EASERA
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin
Variation by CodeWeavers and AFMG