AFMG Network Forum
AFMG Network Forum Index -> EASE 4 -> Same Vertices inserted
Post new topic  Reply to topic View previous topic :: View next topic 
Same Vertices inserted
PostPosted: Wed Aug 27, 2008 4:31 pm Reply with quote
gotallie
Member
 
Joined: 27 Aug 2008
Posts: 2




I imported a large dxf file for a project. When checking data (F5) the error generated is "Same Vertices inserted". There are well over a thousand faces in this room, with many more that need to be added as Ease did not add the most important ones (walls...) Hand editing is not an acceptable solution as Ease generated these Vertices and Faces. What is the answer to this? I spot checked the faces throughout the range and it appears that all of the faces contain this error. Ease version 4.2.3.36.
View user's profile Send private message
PostPosted: Wed Aug 27, 2008 4:43 pm Reply with quote
Jim Mobley
Member
 
Joined: 27 Jul 2005
Posts: 134
Location: Foothill Ranch, California, USA




We could spend lots of time guessing on this, but the best thing is to please send me the .dxf file to look at.

I will note that it sounds like you need to simplify the .dxf file before you try to import it into EASE. One thousand faces is more than you need or want for just about any EASE model.

_________________
Best regards,

Jim Mobley
Sr. Application Engineer
Renkus-Heinz, Inc.
19201 Cook St.
Foothill Ranch, CA 92610 USA
TEL: +1-949-588-9997
FAX: +1-949-588-9514
www.renkus-heinz.com
mailto:jim@renkus-heinz.com
View user's profile Send private message Send e-mail Visit poster's website
same vertices inserted..
PostPosted: Tue Jun 08, 2010 8:47 pm Reply with quote
akalejs
Member
 
Joined: 08 Jun 2010
Posts: 1




Has this been answered at all? We are having the same issue.
View user's profile Send private message
PostPosted: Sun Jun 13, 2010 5:42 pm Reply with quote
Bruce
Member
 
Joined: 19 Apr 2005
Posts: 459
Location: Minneapolis, MN, USA




This bug has been fixed in the latest version of EASE (4.3.9). To fix previously imported DXF files, export them to DXF from EASE 4.3.9 and then do the Import DXF again. This will clean up all the duplicated vertices. Alternatively you could just reimport the file using EASE 4.3.9. It depends on how many other changes you have made which way will be quicker.

_________________
Best Regards,
Bruce C. Olson
View user's profile Send private message Send e-mail Visit poster's website
PostPosted: Tue Feb 07, 2017 12:56 am Reply with quote
hasia
Member
 
Joined: 26 Jan 2017
Posts: 9




I need to import file from Sketchup. The drawing has 500 faces. I have the problem of "same vertices inserted". Please help. Ease version 4.3.9.75
View user's profile Send private message
PostPosted: Tue Feb 07, 2017 11:53 am Reply with quote
Agustín Arias
Member
 
Joined: 10 Apr 2013
Posts: 54
Location: Caseros, Buenos Aires, Argentina




Hi hasia
To delete those vertices you will have to delete them manually:
1) Check data
2) The "same vertices inserted" error appears
3) The Edit Face window appear for that face with repeated vertices
4) Look for those repeated vertices and delete them until one of them is left
5) Click Ok
6) Check data again

If there is another face with the same problem, repeat steps 1 - 6

_________________
Eng. Agustín Arias
Ottobre & Ottobre, Acoustical Consultants
Buenos Aires, Argentina
agustin.arias@outlook.com
View user's profile Send private message Send e-mail Visit poster's website
AFMG Network Forum Index -> EASE 4
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin
Variation by CodeWeavers and AFMG