| Acoustic Design Guideline for venue |
 Posted: Mon Dec 19, 2011 11:18 am |
 |
|
| melmadni |
| Member |
|
| |
| Joined: 14 Nov 2009 |
| Posts: 8 |
| Location: jeddah |
|
|
|
|
|
| Kindly , can anyone give me advice about prison unit with the following characteristics: 19.90m width, 41.9m length, 7.47m height and Volume of 5062.99m3.and • the finishing materials of the surfaces are considered as the following: 1. The ceiling is Rough Concrete. 2. The floor is Rough Concrete. 3. The wall is Rough Concrete.
4.The Architectural openings covered with Steel .
•The assumed noise level is 65dB. - Audience area level at 1.5m.
•The assumed humidity level is 60%. - All Calculations to be done at, 1000Hz. We used 9 line array speakers TOA but the result is very bad intelligibility also considered The customer did not allow active treatments or use acoustical materials the RT is 4.62 second at 1KHZ.
Please give me solutions for this issue .
thans.
modather
 |
|
|
|
|
| Posted: Mon Dec 19, 2011 9:12 pm |
|
|
| Bruce |
| Member |
|
| |
| Joined: 19 Apr 2005 |
| Posts: 459 |
| Location: Minneapolis, MN, USA |
|
|
|
|
|
|
|
_________________
Best Regards,
Bruce C. Olson |
|
|
|
| AFMG Network Forum Index -> EASE 4 |
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
All times are GMT
Page 1 of 1
|
|
|
|
|
AFMG Network Forum
