AFMG Network Forum
AFMG Network Forum Index -> EASE 4 -> Add tail to aura response
Post new topic  Reply to topic View previous topic :: View next topic 
Add tail to aura response
PostPosted: Tue Jun 08, 2010 1:02 pm Reply with quote
cp
Member
 
Joined: 22 Apr 2010
Posts: 6




Hi there,
I've calculated an Aura Response of my room model. I kept the Parameter length short for a faster calculation. The plan was to add some random tail to the response file using Probe. But the add tail option are all greyed out - meaning I cant use them. Is there something to activate in Probe processing or specific settings before starting a simulation in Aura Response calculation that I dont know of?

Thanx
cp

_________________
Max Röhrbein
IOSONO GmbH
View user's profile Send private message
PostPosted: Fri Jun 18, 2010 7:38 am Reply with quote
Stefan
Member
 
Joined: 19 Apr 2005
Posts: 167
Location: Berlin, Germany




Please always run AURA calculations at full length. Nowadays, adding a random tail is only recommended in special cases.

AURA itself was developed to be used as a full-length calculation. Therefore the random tail function is not available.
View user's profile Send private message Send e-mail Visit poster's website
PostPosted: Tue Nov 16, 2010 1:49 pm Reply with quote
cp
Member
 
Joined: 22 Apr 2010
Posts: 6




Hi Stefan,
du sagst adding random tail is only recommended in special cases. vielleicht handelt es sich bei meiner anwendung genau darum.
ich benötige für eine externe auralization einen mit ease berechneten zufälligen nachhallschwanz, da ich das durch aura calculation berechnete ease rsp file nur bis ca.300ms verwenden will.
meine derzeitige vorgehensweise, wäre nun über raytracing impact eine möglichst hohe trefferquote zu erzielen und mit dem damit erstellten rsp file den nachhallschwanz zu generieren. ich habe aber die befürchtung, dass das rsp durch raytracing impact nicht unbedingt vergleichbar mit der aura calculation ist. daher die frage: add random tail kann auf aura calculations nie anwenden? wenn doch wie? kann man den nachhallschwanz aus raytracing impact berechnung an den frühen teil aura calculation anhängen?

_________________
Max Röhrbein
IOSONO GmbH
View user's profile Send private message
PostPosted: Tue Nov 16, 2010 2:43 pm Reply with quote
cp
Member
 
Joined: 22 Apr 2010
Posts: 6




hi,
noch eine weitere frage in bezug auf den vorherigen post. kann man überhaupt nachhallschwänze alleine als wavs exportieren?

_________________
Max Röhrbein
IOSONO GmbH
View user's profile Send private message
AFMG Network Forum Index -> EASE 4
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin
Variation by CodeWeavers and AFMG