AFMG Network Forum

AFMG Network Forum Index -> AFMG EASERA -> Problem with creating custom signals    View previous topic :: View next topic  Problem with creating custom signals Posted: Thu Jul 30, 2009 8:16 pm bthornock Member   Joined: 15 Jul 2009 Posts: 5 I just installed EASERA on a different computer (3 GHz, 3.5GB RAM, MOTU 896mk3) and created some bandlimited excitation signals (weighted sweep) like I have done previously. However, upon playing the signal back in live mode, the frequency output only goes up to approximately 1.5 kHz when my cutoff is supposed to be 22kHz. I am sampling at 192 kHz and want to create signals 2.7s and 5.5s in length. I did find that I could successfully make 1.4s signals with the appropriate frequency range that plays the entire range, but I plan to use these signals in rooms with longer reverberation times and hope to get this working correctly. Any suggestions? Posted: Mon Aug 03, 2009 8:10 am Waldemar Member   Joined: 05 Dec 2005 Posts: 112 It seems that there is a bug in the signal gererator for this combination of parameters. I would suggest to use pink sweep or white sweep. _________________ Best Regards SDA, Waldemar Richert AFMG Network Forum Index -> AFMG EASERA You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum All times are GMT   Page 1 of 1   All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First  Select a forum General----------------Board RulesForum Announcements Software Forums----------------EASE 5EASE 4EASE EvacAFMG EASERAAFMG SysTuneAFMG SoundFlowAFMG ReflexEASE FocusEASE AddressSDK for GLL PLug-in API   Powered by phpBB © 2001-2003 phpBB Group Theme created by Vjacheslav Trushkin Variation by CodeWeavers and AFMG