AFMG Network Forum

John W · Member

Looking for some hints and tips on time aligning subs to rest of system in Systune. Using Systune for the rest of system(main array to infill/outfills/delays) but not having any fun looking at the sub in the IR or ETC screens. How does the rest of the Systune world time align there subs? thanks John W

Charlie · Member

Hi John,
An article I wrote on this subject was recently published in the June 2008 issue of Live Sound International. It can be found here, http://livesound.idigitaledition.com/
Hopefully this will detail some of the basics of what to look for in the measurements and how to acheive the desired end result.

Woodstock · Member

[quote="Charlie"]Hi John,
An article I wrote on this subject was recently published in the June 2008 issue of Live Sound International. It can be found here, http://livesound.idigitaledition.com/
Hopefully this will detail some of the basics of what to look for in the measurements and how to acheive the desired end result.[/quote]

Hi Charlie,
could you send us a link. I can't find the article in the June 2008 issue of Live Sound International.
Woodstock

Charlie · Member

Hi Woodstock,
It seems the article was not in the June issue but instead was in the April 2008 issue. My apologies for the error. A copy can also be found here,
http://www.excelsior-audio.com/Publications/Subwoofer_Alignment.pdf