AFMG Network
Forums for AFMG Software
AFMG Network Forum Index -> EASERA - Discussion -> Editing spectrum in live mode
Post new topic  Reply to topic View previous topic :: View next topic 
Editing spectrum in live mode
PostPosted: Tue Mar 03, 2015 12:38 pm Reply with quote
Bartek Zdeb
Member
 
Joined: 16 May 2011
Posts: 6
Location: Poland




Hi,
Is it possible to edit the file .els with saved spectrum?
If so, how?
I would like to edit or to do spectrum with the noise eg. NC-30 or any.
Thus prepared, I will use the file as a noise file to correct the STI.
Does anyone know the solution?
Thanks in advance.
Bartek

_________________
---------------
best regards,
bartek
View user's profile Send private message Visit poster's website
PostPosted: Tue Mar 03, 2015 5:04 pm Reply with quote
Bruce
Member
 
Joined: 19 Apr 2005
Posts: 430
Location: Minneapolis, MN, USA




Hello Bartek,

It is not possible to edit the .ELS file. However, there is an easier way. On the STI Properties page you can directly enter the Octave Band values in the text boxes for the Spectrum and/or the noise.

_________________
Best Regards,
Bruce C. Olson
View user's profile Send private message Send e-mail Visit poster's website
PostPosted: Wed Mar 04, 2015 11:30 am Reply with quote
Bartek Zdeb
Member
 
Joined: 16 May 2011
Posts: 6
Location: Poland




Hi Bruce,
Thank you for your reply. I know I can do it as written. The method is good for several samples, but with more example eg. 100 is very time-consuming. Mostly during STI measurements background noise is low. In fact, it is much higher. For convenience, in many cases, to measure background noise I use the handy octave (1/3 octave) analyzer or get a background sound from third parties. In such cases, I would like to quickly correct the measured STI for 100 points.
How to do this quickly?
Thanks in advance.

_________________
---------------
best regards,
bartek
View user's profile Send private message Visit poster's website
PostPosted: Wed Mar 04, 2015 5:24 pm Reply with quote
Bruce
Member
 
Joined: 19 Apr 2005
Posts: 430
Location: Minneapolis, MN, USA




Hi Bartek,

There are two places to set this. If you do it in Options [F9] before loading the files, it is remembered for every file. If you use Properties [F4], then it only changes it for the current file.

_________________
Best Regards,
Bruce C. Olson
View user's profile Send private message Send e-mail Visit poster's website
PostPosted: Tue Mar 10, 2015 8:48 am Reply with quote
Bartek Zdeb
Member
 
Joined: 16 May 2011
Posts: 6
Location: Poland




Hi Bruce,
Thank you so much for your help.

_________________
---------------
best regards,
bartek
View user's profile Send private message Visit poster's website
Editing spectrum in live mode
AFMG Network Forum Index -> EASERA - Discussion
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin
Variation by CodeWeavers