AFMG Network Forum
AFMG Network Forum Index -> EASE 4 -> Open room issue
Post new topic  Reply to topic View previous topic :: View next topic 
Open room issue
PostPosted: Fri Jun 02, 2017 3:57 pm Reply with quote
johnxing
Member
 
Joined: 01 Jun 2017
Posts: 3




it is weird that there is no Room Geometry data in the fields once Room open is unchecked and Recompute button is clicked. There are holes shown in the Check Holes window.
But, if open room is checked, there are Room Geometry data shown in all fields and "well done" is popped up once the check hole is selected.
What's wrong with closed room? How to fix it? Please advise.
Thanks,
John
View user's profile Send private message
PostPosted: Fri Jun 02, 2017 5:35 pm Reply with quote
Agustín Arias
Member
 
Joined: 10 Apr 2013
Posts: 54
Location: Caseros, Buenos Aires, Argentina




After uncheck Room Open, you will have to Check Data (F5) in order to EASE calculate the geometrical data. If there are holes, the data can't be checked. You will have to close those holes first. When the Room Open is checked, EASE interprets that the room is not a closed volume, so there is no analysis of the enclousure, so there are less holes to test. But when you uncheck the Open Room, EASE will check if the boundaries of the volume (room) are well conected and it is very common that in this instance a lot of "new" holes will be detected

_________________
Eng. Agustín Arias
Ottobre & Ottobre, Acoustical Consultants
Buenos Aires, Argentina
agustin.arias@outlook.com
View user's profile Send private message Send e-mail Visit poster's website
AFMG Network Forum Index -> EASE 4
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin
Variation by CodeWeavers and AFMG