AFMG Network
Forums for AFMG Software
AFMG Network Forum Index -> EASERA - Discussion -> EASERA Distortion post processing questions
Post new topic  Reply to topic View previous topic :: View next topic 
EASERA Distortion post processing questions
PostPosted: Tue Sep 04, 2012 7:36 pm Reply with quote
hadisumoro
Member
 
Joined: 01 Oct 2007
Posts: 39
Location: USA




Hi all,

I have questions about EASERA Distortion post processing. I am using EASERA 1.2.2Beta Pro, with Polar module. Please follow my description below:
Download file: http://www.mediafire.com/?64c4sva3z7payll

1. measure speaker with log-sweep, with 4 averages and 1 presend (48kHz sample rate).
2. no post processing (window or other) is applied. The data is saved as Distortion at 10percent.efr.
3. Go to Distortion menu - Options - change the smoothing to 1/3 oct (custom) - hit okay.
4. Look at relative spectra, go to overlay and erase everything but 2nd harmonics.
5. Change Y axis to percent and put some markers - this far, it should look like screenshot1.png.
6. File - Export Spectrum (1/3 oct resolution, Data in columns) - Distortion at 10percent.txt

When I open this data, I notice if the percentage does not match screenshot1.png

I have tested this with other EASERA measurement, and same result happens. I think I did not do a right transfer from dB to percent when it asked: 0dB = 0 Val.

1. What is the correct way/value to input in the conversion from dB to percent?
2. Is the mismatch between screenshot1.png and the exported txt file caused by incorrect value I input during dB to % axis change? At the same time I notice the data in the txt file does not really match the curve.
3. Aside from number 1 and 2 above, can I transfer the percentage result (or relative result) to a txt file (assuming if the current exported data is, let's say, the freq response in percent)?

Please advise.

Hadi
View user's profile Send private message
PostPosted: Wed Sep 05, 2012 1:08 pm Reply with quote
Charlie
Member
 
Joined: 28 Apr 2005
Posts: 51
Location: Charlotte, NC USA




Hi Hadi,
There does seem to be disagreement between the graphed distortion in EASERA and the exported spectrum of the distortion. I'll forward this to support in Berlin for them to look into it.

_________________
Charlie Hughes
View user's profile Send private message Visit poster's website
PostPosted: Wed Sep 05, 2012 1:48 pm Reply with quote
hadisumoro
Member
 
Joined: 01 Oct 2007
Posts: 39
Location: USA




Thank you for checking on this, Charlie.
View user's profile Send private message
PostPosted: Fri Oct 05, 2012 5:44 pm Reply with quote
yphs_mst
Member
 
Joined: 27 Apr 2007
Posts: 12




Hello,

I have another question about distortion post processing. After I loaded several files, I'd like to overlay the distortion graph. How do change the smoothing for different files at once? Is there a way to change the 1/48th - default (from the software/master control)?

I usually do it manually one by one, but this time I am overlaying more than 20 files at once. Please advise.

Hadi

_________________
Hadi Sumoro
View user's profile Send private message Visit poster's website Yahoo Messenger MSN Messenger ICQ Number
PostPosted: Fri Oct 05, 2012 9:15 pm Reply with quote
Charlie
Member
 
Joined: 28 Apr 2005
Posts: 51
Location: Charlotte, NC USA




Hi Hadi,
The distortion options that control the smoothing for the display are unique to each data file. This can be accessed by clicking Data > Properties (F4). I don' think there is a way to change the distortion display smoothing for multiple files at the same time. Sorry. Sad

_________________
Charlie Hughes
View user's profile Send private message Visit poster's website
PostPosted: Mon Nov 19, 2012 7:27 am Reply with quote
peter9091
Member
 
Joined: 19 Nov 2012
Posts: 1




Thanks for checking ...... it's very useful for us .....

_________________
D_avi_D
View user's profile Send private message
PostPosted: Sat Dec 06, 2014 9:18 am Reply with quote
sanimirza606
Member
 
Joined: 06 Dec 2014
Posts: 1




Dave,
you can save a Live Spectrum only for Overlays. Create Overlays first, then you can save them.

_________________
Sani
View user's profile Send private message
EASERA Distortion post processing questions
AFMG Network Forum Index -> EASERA - Discussion
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
All times are GMT  
Page 1 of 1  

  
  
 Post new topic  Reply to topic  


Powered by phpBB © 2001-2003 phpBB Group
Theme created by Vjacheslav Trushkin
Variation by CodeWeavers